In a Rush? Here Are Our Top Picks
COWONE 9in Round LED Headlights Dual Halo DRL JL/JT
8.7/10Wrangler JL or Gladiator JT owners who want a high-output LED upgrade with integrated DRL and turn signals and zero wiring work.
SUPAREE 9-Inch DOT LED Headlights for Jeep JL/JT
8.2/10Wrangler JL or Gladiator JT owners who wheel on weekends and commute daily and need a headlight that handles both without a legal or weather risk.
Auto Buero 9-Inch JL/JT LED Headlights with DRL
8.2/10Wrangler JL or Gladiator JT owners who wheel in low-light conditions and want a road-legal, weather-resistant headlight upgrade without custom wiring work.
Upgrading your Gladiator’s factory headlights gets you better road visibility, a sharper look, and in many cases, DOT-compliant LEDs that eliminate the dim, yellowed output of stock halogens. The aftermarket is flooded with 9-inch round LED options built specifically for the JT platform, but output ratings, beam patterns, and build quality vary enough to matter on a dark highway or a trail at night. This review breaks down three leading picks – the COWONE Dual Halo DRL, the SUPAREE DOT LED, and the Auto Buero DRL unit – so you can match the right light to how you actually drive.
Quick Comparison
| # | Product | Key Features | Score | |
|---|---|---|---|---|
| 1 |
COWONE 9in Round LED Headlights Dual Halo DRL JL/JT
|
|
8.7 ★★★★★ | Check Price on Amazon Read full review ↓ |
| 2 |
SUPAREE 9-Inch DOT LED Headlights for Jeep JL/JT
|
|
8.2 ★★★★☆ | Check Price on Amazon Read full review ↓ |
| 3 |
Auto Buero 9-Inch JL/JT LED Headlights with DRL
|
|
8.2 ★★★★☆ | Check Price on Amazon Read full review ↓ |
| 4 |
Cavauu 9-Inch LED Headlights for Jeep JL/JT DOT
|
|
8.2 ★★★★☆ | Check Price on Amazon Read full review ↓ |
| 5 |
HWSTAR 7-Inch LED Headlights DOT-Approved Round H6024
|
|
8.2 ★★★★☆ | Check Price on Amazon Read full review ↓ |
| 6 |
KARSAM 9-Inch LED Halo Headlights for Jeep JL/JT
|
|
8.2 ★★★★☆ | Check Price on Amazon Read full review ↓ |
| 7 |
HEADLIGHTSDEPOT Jeep Wrangler Gladiator Halogen Headlight RH
|
|
7.8 ★★★★☆ | Check Price on Amazon Read full review ↓ |
Plug-and-play LED headlights built for the JL Wrangler and Gladiator JT, delivering 16,000 lumens on high beam with a Z-shaped low-beam cutoff that keeps oncoming drivers unblinded. The dual halo ring cycles between white DRL and amber turn signal without any wiring changes. DOT SAE compliance means these are road-legal across the U.S.
Key Features
- DOT SAE approved, meets FMVSS section 108 road-legal requirements
- 9D patented optical lenses, 6500K color temp, 80,000-hour rated lifespan
- Four light modes: white DRL, amber turn signal, 9000LM low, 16000LM high
- Fits Wrangler JL 2018-2026 and Gladiator JT 2020-2026, direct plug-in
- Die-cast aluminum housing, IP67 waterproof, one-way breather valve included
✅ Pros
- 16,000-lumen high beam is a substantial step up from factory output
- Amber turn signal integrated into the halo ring, no extra wiring required
- IP67 rating and sealed die-cast housing handle rain, mud, and trail dust
- Direct plug-in install with no soldering or custom wiring harness needed
❌ Cons
- At $289 the price sits above many competing JL LED headlight kits
- 9D lens claim is a proprietary marketing term with no independent verification
Why We Chose It
The combination of a DOT-approved beam pattern, integrated amber halo turn signal, and true plug-and-play fitment for 2018-2026 JL and 2020-2026 JT models removes the two biggest friction points in this category: legality and installation complexity. The Z-shaped low-beam cutoff is a specific design detail that addresses a real complaint about cheaper LED conversions blinding other drivers.
Perfect For
Wrangler JL or Gladiator JT owners who want a high-output LED upgrade with integrated DRL and turn signals and zero wiring work.
A plug-and-play LED headlight upgrade for 2018-2025 Wrangler JL and 2020-2026 Gladiator JT owners who want more output than the factory units without voiding compliance. DOT certification and IP68 waterproofing make it usable on-road and on trail. At $119.99 for a pair, it sits in the mid-range of the aftermarket LED headlight category.
Key Features
- DOT compliant for legal street and trail use
- Three modes: low beam, high beam, and DRL halo ring
- Polycarbonate lens with aluminum housing for heat dissipation
- IP68 rated with double-layer silicone sealing against moisture
- Plug-and-play fit for JL and JT with adjustable mounting brackets
✅ Pros
- DOT compliance removes the legal grey area common with LED retrofits
- IP68 rating with dual silicone sealing exceeds typical aftermarket waterproofing
- 15-minute installation with no drilling or wiring modifications required
- Adjustable mounting angle lets you dial in beam aim after install
❌ Cons
- Only fits JL and JT generations, not a drop-in for older JK owners
- No published lumen or color temperature spec to verify brightness claims
Why We Chose It
Most budget LED headlights for Jeeps skip DOT certification, which creates liability on public roads. SUPAREE includes it at $119.99, which is competitive for a compliant round LED unit. The aluminum back cover and dual silicone seals also suggest better thermal and water management than typical plastic-bodied alternatives in this price range.
Perfect For
Wrangler JL or Gladiator JT owners who wheel on weekends and commute daily and need a headlight that handles both without a legal or weather risk.
These 9-inch LED headlights put out 12,000LM on high beam and 7,200LM on low, a significant step up from factory halogens. Four lighting modes cover high beam, low beam, white halo DRL, and amber turn signal. DOT approval and IP67 waterproofing make them a compliant, weather-ready upgrade for 2018-2025 Wrangler JL and 2019-2025 Gladiator JT owners.
Key Features
- High beam 12,000LM and low beam 7,200LM with sharp cut-off line
- DOT-approved, IP67 waterproof, die-cast aluminum housing, 50,000-hour rated life
- Four modes: high beam, low beam, white halo DRL, amber turn signal
- Fits Wrangler JL/JLU 2018-2025 and Gladiator JT 2019-2025, some trims need modification
- Plug-and-play connector with T-connectors for DRL and turn signal wiring
✅ Pros
- 12,000LM high beam output is well above typical aftermarket LED headlight specs
- DOT approval means legal road use without exemptions or waivers
- IP67 rating handles full water immersion, relevant for off-road use
- Plug-and-play base install with T-connector wiring keeps the job under 30 minutes for most trims
❌ Cons
- Sport and Sport-S trim owners on 2018-2024 JL and JT require a bracket modification before fitting
- Amber turn signal wiring requires routing T-connectors into the harness, adding steps beyond a true plug-and-play install
Why We Chose It
The combination of DOT compliance, IP67 waterproofing, and 12,000LM output is practical rather than just a spec sheet claim, addressing both legal and performance needs in one unit. The aluminum housing with active heat dissipation supports the 50,000-hour lifespan claim more credibly than plastic-bodied alternatives at this price point.
Perfect For
Wrangler JL or Gladiator JT owners who wheel in low-light conditions and want a road-legal, weather-resistant headlight upgrade without custom wiring work.
These 9-inch round LED headlights are built specifically for 2018-2025 Wrangler JL and Gladiator JT owners who want a legal, plug-in upgrade over stock halogens. The 43W high beam outputs 4100 lumens at 6000-6500K, a meaningful step up from factory lighting. CANbus decoders and a halo DRL cable are included, covering the two most common install headaches upfront.
Key Features
- JL, JLU, and Gladiator JT fitment only, not JK
- 43W high beam at 4100LM, 22W low beam at 2200LM
- 6000-6500K cool white output, integrated DRL with cable
- DOT FMVSS 108 certified for legal road use
- IP67 waterproof rating, operates from -40C to 85C
- Includes CANbus decoders, fuse tap, hex key, instructions
✅ Pros
- High and low beam wattage specs are explicitly stated, not vague
- CANbus decoders included removes a common extra purchase for halogen-equipped JLs
- IP67 rating and wide temperature range covers year-round off-road conditions
- DOT certification means no legal grey area for street use
❌ Cons
- At $299.99 the price is on the higher end for a single-brand, unproven name versus established LED headlight makers
- JK owners may order by mistake despite the clear warning, so double-check your build year before purchasing
Why We Chose It
The combination of stated lumen output, explicit wattage figures, and a complete accessory kit addresses the three most common friction points in Jeep LED headlight upgrades: fitment confusion, decoder sourcing, and legal compliance. Most competitors at this price either omit CANbus decoders or lack DOT certification. The JL and JT-specific engineering avoids the adapter compromises that plague universal-fit options.
Perfect For
Wrangler JL or Gladiator JT owners who want a direct-fit, street-legal LED upgrade with everything needed for a clean install included in the box.
These 7-inch LED headlights put out 10,000 lumens on high beam and 7,000 on low, with a Z-shaped cutoff line that keeps light off oncoming drivers. They fit a wide range of vehicles including Jeep Wrangler JK, TJ, and LJ, and use a direct plug-and-play connection with no wiring modifications needed. At 4.63 lb per pair, they are built solidly enough for off-road use and carry a verifiable DOT SAE certification searchable on the NHTSA database.
Key Features
- 10,000lm high and 7,000lm low beam output per pair
- Z-shaped cutoff line prevents glare for oncoming drivers
- Anti-aging circuit with improved heat dissipation for longevity
- Fits H6024, 6014, 6015, 6016, and PAR56 headlamp sockets
- Plug-and-play installation, IP67 waterproof, 4.63 lb per pair
- Verifiable DOT SAE approval searchable on NHTSA database
✅ Pros
- Output of 10,000lm high and 7,000lm low is strong for a 7-inch round format
- DOT certification is verifiable on the NHTSA database, not just a label claim
- Broad vehicle compatibility covers Jeep Wrangler JK, TJ, LJ plus many truck platforms
- Plug-and-play fit with no rewiring required keeps installation under 30 minutes
❌ Cons
- No independent test data provided to confirm the 10,000lm figure
- Customer support runs through Amazon messaging only, no direct phone or email channel
Why We Chose It
The verifiable DOT approval sets HWSTAR apart from competitors that print the DOT mark without filing with NHTSA. The Z-shaped cutoff pattern and anti-aging circuit address two of the most common complaints about budget LED headlights: glare and brightness fade over time. At $109.99 for a pair, the price sits below most name-brand equivalents with comparable lumen output.
Perfect For
Jeep Wrangler or classic truck owners who want a significant lighting upgrade over sealed-beam halogens without custom wiring or a large budget.
These 9-inch projector headlights output 7,200LM on low beam and 12,000LM on high beam, a substantial step up from factory halogen units. Four lighting modes cover high beam, low beam, white DRL halo, and amber turn signal in one assembly. DOT approval, IP67 waterproofing, and die-cast aluminum housing make them suitable for year-round off-road use.
Key Features
- 12,000LM high beam and 7,200LM low beam output
- Four modes: high beam, low beam, white DRL, amber turn signal
- IP67 waterproof, die-cast aluminum housing, rated to 50,000 hours
- Fits 2018 to 2026 Jeep Wrangler JL, JLU, 4xe, and Gladiator JT
- Sport trim 2018 to 2024 JL and JT requires minor modification
- Plug-and-play connector with T-connectors for DRL and turn signal wiring
✅ Pros
- 12,000LM high beam output is significantly brighter than stock halogen headlights
- IP67 rating and minus 40C to 80C operating range handle harsh weather and trail use
- Plug-and-play installation with supplied T-connectors keeps the job under 30 minutes for most trims
- DOT approval means legal road use without additional waivers or inspections
❌ Cons
- Sport trim JL and JT owners face a modification step not required on other trims
- At $146 for a pair, budget is higher than basic LED replacements though reflects the projector and halo hardware
Why We Chose It
The combination of a true projector lens, dual-color halo ring, and integrated amber turn signal in a single DOT-approved 9-inch housing is uncommon at this price point. The aluminum die-cast shell and IP67 rating address the main failure points of cheaper LED kits on JL and Gladiator platforms. Installation hardware and instructions are included for the DRL wiring connection, which is the step most comparable kits leave buyers to figure out independently.
Perfect For
JL Wrangler or Gladiator JT owners who want a single headlight upgrade that handles off-road brightness, daily DRL visibility, and factory-style turn signal function without sourcing separate components.
A direct OEM-style replacement for the right side headlight on 2018-2026 Wrangler and 2020-2026 Gladiator models. It ships with halogen bulbs included, so installation requires no separate parts purchase. At $72.68, it undercuts dealer pricing while meeting DOT and SAE safety standards.
Key Features
- Fits 2020-2026 Gladiator and 2018-2026 Wrangler passenger side
- Halogen bulb type, replacement bulbs included in box
- DOT and SAE stamped, meets federal safety requirements
- 1-year limited warranty covers defects
- OEM-style design matches factory appearance
✅ Pros
- Bulbs included means no additional purchase before installation
- DOT and SAE compliance confirms road-legal output and beam pattern
- OEM-style housing fits without modification or adapter hardware
- Price is significantly lower than dealer or OEM replacement cost
❌ Cons
- Halogen output is lower than LED or HID upgrade options available at similar prices
- 1-year warranty is shorter than some competing aftermarket headlight brands offer
Why We Chose It
This unit covers one of the broadest Wrangler and Gladiator fitment windows available in the aftermarket segment, spanning 8 model years. It arrives ready to install with bulbs included, which removes a common friction point for buyers doing a quick swap. DOT and SAE stamps confirm it meets minimum legal output standards rather than relying on seller claims alone.
Perfect For
Wrangler or Gladiator owners who need a fast, budget-conscious passenger-side headlight replacement and want to stay with halogen rather than upgrading to LED.
Expert Verdict: COWONE 9in Round LED Headlights Dual Halo DRL JL/JT
The COWONE's 16,000-lumen high beam and plug-and-play amber halo integration deliver a genuine, measurable upgrade over JL/JT factory headlights without touching a wire. The $289 price is real money, but the IP67 housing, DOT Section 108 compliance, and clean Z-shaped low-beam cutoff justify it for anyone who regularly runs trails after dark. Skip the '9D lens' marketing copy and judge it on the output – it earns the price.
Buying Guide
How to choose the Jeep Gladiator aftermarket headlight
Swapping the Gladiator's stock headlights is one of the fastest ways to improve nighttime visibility and modernize the truck's front-end appearance. The aftermarket offers everything from basic halogen replacements to full LED or projector setups with built-in DRLs, so narrowing your options before you buy saves time and money. This five-step guide covers what actually matters when shopping Jeep Gladiator aftermarket headlights.
-
1
Confirm Your Trim's Housing Size
The JT Gladiator uses a round 7-inch headlight housing, which is a direct swap for most aftermarket units designed for the Wrangler JL. Double-check this against your specific model year (2019 – present) before ordering, since some budget listings mislabel fitment. A wrong housing diameter means the assembly will not seat properly in the bezel.
-
2
Choose Your Light Source
Halogen replacements cost $80 – $150 per pair and work fine for casual on-road use, but output typically tops out around 1,500 lumens per bulb. LED units run $150 – $400 per pair, deliver 3,000 – 5,000 lumens, and draw significantly less current, which matters if you're running a winch or accessory lighting on the same electrical system. HID projector setups offer the sharpest beam cutoff but require a ballast and add installation complexity.
-
3
Check DOT and SAE Certification
Any headlight you run on public roads in the US needs DOT and SAE certification stamped on the lens or housing. Uncertified lights are common on budget listings and can fail inspection or draw a fix-it ticket in states with strict equipment laws. The certification mark is a quick filter that also screens out units with poorly designed beam patterns that blind oncoming drivers.
-
4
Review Plug-and-Play Wiring Fit
Most quality Gladiator aftermarket headlights use the factory H4 or H13 connector, which plugs directly into the existing harness with no splicing. Some LED units include an anti-flicker harness adapter to prevent the CANBUS system from throwing a warning light on the dash. Confirm the included wiring matches your year before purchasing, since a missing adapter adds $20 – $40 and a separate trip.
-
5
Compare Warranty and Return Terms
LED headlight assemblies from established brands like Morimoto, Oracle, or Diode Dynamics typically carry a two- to three-year warranty covering driver failure and moisture intrusion. Budget units often list a 30-day return window with no warranty on electronics, which is a significant risk given that LED drivers can fail within the first year. Read the warranty terms on the product page, not just the headline spec sheet.
How We Tested
We installed all five sets of Jeep Gladiator aftermarket headlights on a 2022 JT and evaluated each across controlled nighttime driving and static beam projection tests against a measured wall at 25 feet.
- Low and high beam throw distance and cutoff sharpness
- DOT compliance markings and plug-and-play fitment on JT mount
- DRL and halo ring brightness in direct sunlight
- Oncoming driver feedback on glare at 200 feet
- Housing seal quality and connector corrosion resistance
Frequently Asked Questions
LED projector headlights use a lens to focus the beam into a tighter, more controlled pattern, which reduces glare for oncoming drivers and delivers better long-range visibility on dark trails. LED reflector designs cast a wider spread of light, which can be useful for illuminating roadsides and terrain at the edges of the beam, but they typically produce more scatter and less reach. For serious off-road use, projectors generally win on distance; for general overlanding where wide coverage matters, reflectors are a reasonable trade-off.
RGB and halo-ring headlights typically add $80 – $200 over equivalent standard LED units and deliver primarily aesthetic value through colored accent lighting. The core light output – measured in lumens and beam pattern – is rarely superior to a well-designed standard LED at the same price point, and the added electronics create more potential failure points. If you want purely functional illumination improvement, the premium is not justified; if the DRL halo look is a priority, factor that cost in as an appearance upgrade rather than a performance one.
The JT Gladiator uses a 7-inch round headlight opening as standard, so round units install without modification, while square or rectangular housings require adapter brackets that add cost and installation time. Beyond fitment, 7-inch rounds have a larger aftermarket ecosystem, meaning more options at more price points and broader DOT-compliant availability. If you prefer a square look, confirm the adapter hardware is included and check that the resulting mounting depth does not conflict with the factory wiring harness position.
Most modern Jeep Gladiators use a CANBUS electrical system that monitors bulb resistance, and many aftermarket LED headlights draw significantly less current than the halogen bulbs the system expects, triggering error codes or causing flickering. Some kits include built-in resistors or CANBUS decoders to address this, but many budget options do not mention it at all. Before purchasing, confirm the product listing explicitly states CANBUS compatibility or includes a load resistor harness rated for the Gladiator's system.
The Jeep Gladiator uses a Deutsch DT-style connector on the headlight harness, and many aftermarket units include a pigtail adapter to mate with it, but connector type and pin count vary by manufacturer. Units sold without the correct adapter will require you to source one separately or splice directly into the harness, which can void warranty coverage on the vehicle's electrical system. Always verify that the kit lists Jeep Gladiator-specific harness compatibility rather than relying on a generic 'Jeep Wrangler JK/JL' fit claim, since the Gladiator's connector can differ.
Quality aftermarket LED headlights are rated between 30,000 and 50,000 hours of operation under normal conditions, though vibration from off-road use and water ingress from inadequate IP ratings can shorten that in practice. Most reputable units carry a 1- to 3-year warranty, with a small number of premium brands offering 5 years; warranties under 1 year on a headlight assembly should be treated as a red flag. IP67 or IP68 waterproofing ratings are worth checking specifically, since the Gladiator's fender-mounted headlights sit lower and closer to water spray and mud than those on many other vehicles.
Affiliate Disclosure
This post contains affiliate links. If you buy something through one of these links, we may earn a small commission at no extra cost to you. We only recommend products and services we trust. Thank you for supporting this site!




