In a Rush? Here Are Our Top Picks
Auxbeam MT8S 3-Inch Motorcycle Aux Lights Dual-Color
8.2/10Motorcycle and ATV riders who frequently ride in variable weather and want one light set that handles fog, rain, and clear-night conditions without swapping units.
Auxbeam MT1 2-Inch Dual-Color Motorcycle Aux Lights
8.2/10Adventure motorcycle and dual-sport riders who need fog visibility and long-range illumination switchable on the fly without adding bulky light bars.
Future Eyes F150 LED Motorcycle Fog Lights 2.1in Dual-Color
8.2/10Motorcycle and ATV riders who do mixed urban and off-road riding and want switchable fog and high-beam aux lights without modifying their stock wiring.
Motorcycle auxiliary lights extend your visibility window at night and in poor weather, but the wrong pair creates glare, cuts out in vibration, or throws a beam pattern that misses the road edges you actually need to see. The options tested here – the Auxbeam MT8S 3-inch, the Auxbeam MT1 2-inch, and the Future Eyes F150 2.1-inch – all offer dual-color output and claim weather resistance, so the differences come down to beam quality, build durability, and how cleanly they mount to your specific bike. This guide breaks down exactly where each light earns its price and where it falls short.
Quick Comparison
| # | Product | Key Features | Score | |
|---|---|---|---|---|
| 1 |
Auxbeam MT8S 3-Inch Motorcycle Aux Lights Dual-Color
|
|
8.2 ★★★★☆ | Check Price on Amazon Read full review ↓ |
| 2 |
Auxbeam MT1 2-Inch Dual-Color Motorcycle Aux Lights
|
|
8.2 ★★★★☆ | Check Price on Amazon Read full review ↓ |
| 3 |
Future Eyes F150 LED Motorcycle Fog Lights 2.1in Dual-Color
|
|
8.2 ★★★★☆ | Check Price on Amazon Read full review ↓ |
| 4 |
Future Eyes F150S 1.6" Auxiliary Lights 6-Mode Kit
|
|
8.2 ★★★★☆ | Check Price on Amazon Read full review ↓ |
| 5 |
Kewig Dual-Color Strobe LED Motorcycle Fog Light Kit
|
|
7.8 ★★★★☆ | Check Price on Amazon Read full review ↓ |
| 6 |
Zmoon 60W Dual-Color LED Fog Light Pods 2-Pack
|
|
7.8 ★★★★☆ | Check Price on Amazon Read full review ↓ |
| 7 |
Auxbeam MT8 3-Inch Dual-Color LED Fog Lights
|
|
7.8 ★★★★☆ | Check Price on Amazon Read full review ↓ |
| 8 |
Kewig Dual-Color Strobe LED Motorcycle Fog Lights 60W
|
|
7.8 ★★★★☆ | Check Price on Amazon Read full review ↓ |
| 9 |
Nilight 1.7in Dual White/Amber LED Fog & Drive Pods
|
|
7.8 ★★★★☆ | Check Price on Amazon Read full review ↓ |
These 3-inch auxiliary lights run 8 lighting modes across 3000K amber and 6500K white beams, covering fog, rain, and night riding in one kit. The start-up halo DRL activates with the ignition automatically, and the bracket system fits crash bars from 22mm to 31mm without tools. At $153, the per-light output of 3000W with IP67 sealing makes this a competitive option for year-round riders.
Key Features
- 8 modes including white, amber, strobe, and alternating flash
- 6 CSP LEDs per light, 6000LM combined, 60W per light
- 3000K amber at 3400LM and 6500K white at 3200LM output
- CNC die-cast aluminum body, IP67 rated, 50000-hour lifespan
- 360-degree rotatable brackets fit 22mm to 31mm crash bars
- Three rubber pad sizes, weatherproof harness, 9-30V DC input
- 2-year warranty with 24/7 customer support
- ACC wire controls DRL; runs only when ignition is on
✅ Pros
- Dual-color output covers both fog conditions and clear-night visibility in one light
- IP67 rating and aluminum housing handle temperature extremes from -40F to 257F
- Tool-free bracket fits three bar sizes without cutting or drilling
- 8 selectable modes give practical options beyond basic on/off
❌ Cons
- DRL cannot be switched off independently once ignition is on, limiting user control
- Some motorcycle models may require custom brackets or additional modification
Why We Chose It
The MT8S separates itself from single-color aux lights by pairing 3000K amber fog-cutting output with 6500K white for general visibility, selectable per riding condition. The bracket system handles three bar diameters and rotates 360 degrees, which removes most fitment headaches at install. For the price, the IP67 rating and 50,000-hour rated lifespan reduce the likelihood of early replacement.
Perfect For
Motorcycle and ATV riders who frequently ride in variable weather and want one light set that handles fog, rain, and clear-night conditions without swapping units.
These 2-inch pods give you six lighting modes including 3000K amber for fog and rain plus 6500K white for distance, all switchable from a single wiring harness. At 6000LM combined and IP67 rated, they cover a wide range of riding conditions without swapping units. The 360-degree adjustable brackets fit handlebars from 0.87 to 1.26 inches, covering most adventure and dual-sport setups.
Key Features
- Six modes: amber low, white high, combo, and three strobes
- 6000LM combined output, 3000K amber and 6500K white beams
- IP67 waterproof, die-cast aluminum housing, 50000-hour rated lifespan
- 360-degree adjustable brackets, four rubber spacer sizes included
- Plug-and-play wiring, ACC-triggered DRL, 9-30V DC compatible
✅ Pros
- Dual color beams let you switch between fog-optimized amber and long-range white without separate lights
- Four rubber spacer sizes cover 0.87 to 1.26-inch bars, fitting most crash bars and handlebars
- ACC-connected DRL activates automatically at ignition, no manual toggle needed
- IP67 rating handles rain, mud, and dust reliably across off-road and street use
❌ Cons
- Bar diameter tops out at 1.26 inches, excluding some larger aftermarket crash bars
- Six modes adds useful flexibility but requires checking the control sequence to avoid accidentally triggering strobe while riding
Why We Chose It
The MT1 stands out because it combines two distinct color temperatures into a single compact 2-inch pod, eliminating the need to run separate fog and driving light sets. The plug-and-play harness with ignition-triggered DRL reduces installation time significantly compared to fully manual wired setups. At $125.99 for a pair with brackets, wiring, and multiple spacers included, the per-feature cost is competitive for this category.
Perfect For
Adventure motorcycle and dual-sport riders who need fog visibility and long-range illumination switchable on the fly without adding bulky light bars.
The F150 pairs white high-beam and amber fog LEDs in a 2.1-inch housing, giving you six lighting modes including strobe and DRL from a single set of aux lights. The plug-and-play wiring harness syncs directly with your bike’s existing high/low beam switch, so installation requires no rewiring. At $125.99 for the pair, the IP67 rating and aluminum alloy build make these a practical pick for year-round riders.
Key Features
- Optical lenses extend night riding range with uniform beam distribution
- Six-plus modes including amber fog, white high beam, strobe, and DRL
- Automotive-grade cutoff limits glare for oncoming traffic
- Aluminum alloy housing with copper-cast LEDs for heat dissipation
- IP67 waterproof and dustproof rating for all-weather use
- Smart harness syncs with OEM high/low beam switch, no rewiring needed
- 360-degree adjustable mounting bracket for beam angle tuning
- Fits crash bars 0.708 to 1.25 inches in diameter
✅ Pros
- Plug-and-play harness integrates with stock switches without cutting wires
- IP67 rating handles rain, mud, and dust reliably
- Six modes cover fog, highway, off-road, and visibility signaling
- 360-degree bracket adjustment suits a wide range of mounting positions
- Fits motorcycles, ATVs, UTVs, scooters, and e-bikes with standard crash bars
❌ Cons
- At 2.1 inches the housing is compact, which may limit raw lumen output compared to larger aux lights
- Crash bar compatibility tops out at 1.25 inches, excluding some adventure bike guards
Why We Chose It
The F150 covers more riding scenarios than single-color aux lights by combining amber fog and white high-beam LEDs with strobe and DRL modes in one unit. The OEM-sync wiring harness removes the biggest installation headache for riders who want to keep their stock controls. The IP67 rating and aluminum construction back up the all-weather claim with measurable specs rather than vague promises.
Perfect For
Motorcycle and ATV riders who do mixed urban and off-road riding and want switchable fog and high-beam aux lights without modifying their stock wiring.
The F150S packs six lighting modes into a 1.6-inch CNC-machined housing, covering everything from amber fog to white high beam and strobe. IP67 waterproofing and a plug-and-play harness mean you can mount these and ride the same day. At $134.99 for a complete kit with five bracket options, the hardware justifies the price for riders who actually need auxiliary lighting versatility.
Key Features
- Six modes including amber fog, white high beam, strobe, and DRL
- High-transmittance lenses with automotive-grade cut-off to reduce glare
- CNC-machined aluminum housing for heat dissipation and durability
- IP67 waterproof and dustproof for rain, mud, and dust
- Plug-and-play harness integrates with OEM high/low beam switches
- Five mounting brackets fit bars from 0.7 to 1.25 inches
- Compatible with motorcycles, ATVs, UTVs, dirt bikes, and scooters
✅ Pros
- Six distinct modes cover commuting, off-road, and safety signaling needs
- IP67 rating holds up in rain and mud without additional sealing
- Plug-and-play wiring works with stock switches, no rewiring required
- Five bracket types give genuine flexibility across different mounting points
- 360-degree adjustable bracket lets you dial in beam angle after installation
❌ Cons
- 1.6-inch housings limit raw output compared to larger auxiliary lights
- 60W combined draw may stress smaller motorcycle batteries over long use
Why We Chose It
The F150S stands out for combining a genuinely broad mode selection with a no-cut wiring harness in a compact 1.6-inch form factor. Most auxiliary kits at this price offer two or three modes and basic brackets, while this kit includes strobe, passing flash, and dual-color output alongside five mounting configurations. The IP67 rating and CNC housing add durability that cheaper die-cast alternatives skip.
Perfect For
Motorcycle and ATV riders who want a single auxiliary light kit that handles daily commuting, night off-roading, and emergency visibility without swapping hardware.
A 60W, 6000-lumen auxiliary light set with switchable white and amber modes plus three strobe patterns for low-visibility riding. The IP68-rated aluminum housing and CNC-machined brackets fit handlebars from 22mm to 28.6mm without adapters. At $145.99 it covers motorcycles, ATVs, and SUVs in one package.
Key Features
- 60W output with high borosilicate optical lenses for focused beam
- Six light modes including three strobe patterns via included switch
- Three handlebar sleeve sizes fit 22mm, 25.4mm, and 28.6mm diameters
- CNC aluminum alloy body with IP68 waterproof rating
- Compatible with motorcycles, ATVs, UTVs, scooters, and golf carts
✅ Pros
- IP68 waterproof rating handles rain, mud, and snow without seal degradation
- Three included sleeve sizes remove the need for separate adapters on most handlebars
- Six switchable modes let you run white driving light, amber fog, or active strobe as conditions change
- Honeycomb heat-sink design reduces chip overheating during extended use
❌ Cons
- Yellow harness wire must connect to ACC or battery positive or strobes will not function, which requires careful wiring attention during install
- No documentation of independent IP68 certification provided, so the rating relies on manufacturer claims alone
Why We Chose It
The combination of a true dual-color output and three distinct strobe modes in a single waterproof unit is uncommon at this price point. The included 6.7ft wiring harness and three sleeve sizes mean most riders can complete the install without sourcing extra hardware. CNC one-piece construction at IP68 gives reasonable confidence in long-term durability.
Perfect For
Adventure and touring riders who need a single light kit that covers night driving, fog conditions, and emergency visibility signaling across multiple vehicle types.
These 1.3-inch pods switch between white and amber output, covering clear nights and low-visibility conditions without swapping bulbs. At $23.74 for a pair, the 6000LM output and 600-foot beam reach are competitive with lights priced significantly higher. Adjustable mounting brackets and a 9-30V input range make fitment straightforward across motorcycles, ATVs, trucks, and boats.
Key Features
- Switches between white and amber modes for varied conditions
- 60W and 6000LM per light via six 10W LED chips
- Bifocal lens focuses beam to approximately 600 feet
- IP65-rated housing resists rain, splashes, and dust
- Aluminum-alloy body with built-in turbofan for heat dissipation
- Rated 50,000-hour lifespan under normal operating conditions
- Compatible with 9-30V DC systems across motorcycles ATVs trucks and boats
- Adjustable mounting brackets allow beam angle tuning after install
✅ Pros
- Dual white and amber modes eliminate the need for separate fog-specific lights
- 60W and 6000LM output is high for a sub-$25 pair
- Active turbofan cooling reduces heat buildup that shortens LED lifespan
- Broad 9-30V compatibility covers most 12V and 24V vehicle systems
❌ Cons
- Turbofan adds a moving part that could fail before the LEDs do
- IP65 is splash-resistant but not submersion-rated, limiting deep off-road water crossings
Why We Chose It
The switchable white and amber output in a compact 1.3-inch pod is the clearest reason to pick these over single-color alternatives at this price. Active cooling via a built-in fan is unusual at this price point and addresses the main failure mode for budget LED pods. The wide voltage range and universal brackets make installation practical across a wide range of vehicles without additional adapters.
Perfect For
Riders and off-road drivers who need auxiliary lighting that works in both clear and foggy conditions without buying two separate light sets.
These 3-inch pods pack 8 lighting modes into a compact, IP67-rated housing, covering everything from steady white at 6500K to alternating amber strobe. The included wiring harness and 360-degree rotatable bracket make mounting straightforward on bars from 22mm to 31mm. At $144 for a pair, they target riders who want versatile auxiliary lighting without sourcing extra hardware.
Key Features
- 8 modes including white, amber, combined, and strobe options
- 6 CSP LED chips per light, 3400LM amber and 3200LM white output
- Die-cast aluminum housing with IP67 waterproof and dust rating
- 360-degree rotatable bracket fits bars from 0.87in to 1.21in
- Compatible with DC 9-30V vehicles including motorcycles, ATVs, and trucks
- ACC wire controls always-on DRL, cannot be disabled by remote
✅ Pros
- Dual 3000K amber and 6500K white outputs address both fog and general night riding
- Complete kit includes wiring harness, brackets, and three rubber pad sizes
- IP67 rating holds up to full water submersion up to 1 meter
- 50,000-hour rated lifespan reduces replacement frequency
❌ Cons
- DRL stays on whenever ignition is in ACC position and cannot be switched off via remote
- Some vehicle models may require additional brackets or wiring modifications
Why We Chose It
The MT8 covers more lighting scenarios than most single-color auxiliary lights in this price range, with 8 distinct modes and genuine dual-color output rather than a simple color filter. The bracket system handles the widest bar diameter range we have seen at this price point, reducing the need for aftermarket adapters.
Perfect For
Motorcycle or ATV riders who frequently ride in mixed conditions, fog, and low-light environments and want one set of lights that handles all three without swapping hardware.
These 60W auxiliary lights output 5000 lumens through high borosilicate optical lenses, covering night riding and low-visibility conditions. You get six light modes including white, amber, and three strobe patterns, all switchable from a handlebar-mounted switch. The IP68-rated aluminum housing fits handlebars from 22mm to 28.6mm with the included sleeve kit.
Key Features
- 60W chips with 5000 lumens through borosilicate optical lenses
- Six switchable modes including white, amber, and three strobe patterns
- CNC aluminum alloy body rated IP68 with honeycomb heat dissipation
- Universal bracket fits 22mm, 25.4mm, and 28.6mm handlebars
✅ Pros
- IP68 waterproofing makes these genuinely usable in rain and mud
- Three strobe patterns add real utility as a road hazard warning
- Sleeve kit covers the three most common handlebar diameters
- CNC one-piece aluminum construction resists corrosion over time
❌ Cons
- Yellow wire must connect to ACC or battery positive for modes to function, which may require basic wiring work
- No brightness adjustment within each color mode
Why We Chose It
At this price, the combination of dual-color output, three strobe warning modes, and a genuine IP68 rating is uncommon in this category. The included 6.7ft harness and three handlebar sleeves mean most riders can install these without additional hardware. The honeycomb heat sink design addresses a common failure point in budget LED pods.
Perfect For
Riders who do regular night or low-visibility off-road riding and want auxiliary lights that also double as a strobe warning system.
These 1.7-inch pods switch between white driving light and amber fog light, covering two lighting needs in one compact unit. The convex lens focuses output up to 200 meters rather than scattering it, which matters most on unlit trails or foggy roads. At under $19 for a pair, the aluminum alloy build and IP67 waterproof rating are hard to argue with at this price point.
Key Features
- Switchable white driving and amber fog light modes
- Convex lens focuses beam up to 200 meters distance
- Mounting angle adjusts 180 degrees for beam positioning
- IP67 waterproof, dustproof, and vibration-resistant aluminum housing
- Compatible with motorcycles, ATVs, snowmobiles, trucks, and more
✅ Pros
- Dual-color output covers both clear-night and low-visibility weather conditions
- IP67 rating handles rain, mud, and trail dust without sealing issues
- 180-degree mount adjustability lets you dial in beam angle precisely
- Aluminum alloy body with integrated heat sink prevents thermal throttling
❌ Cons
- 1.7-inch size limits raw lumen output compared to larger auxiliary pods
- No wiring harness or switch included, requiring separate purchase
Why We Chose It
The white-plus-amber dual mode removes the need to buy separate fog and driving lights, which is the main practical advantage over single-color pods at this price. IP67 waterproofing and an all-aluminum body make it credible for off-road and weather-exposed use rather than just dry pavement riding.
Perfect For
Motorcycle and ATV riders who want a low-cost auxiliary lighting upgrade that works in both clear and foggy or rainy conditions.
Expert Verdict: Auxbeam MT8S 3-Inch Motorcycle Aux Lights Dual-Color
The MT8S delivers genuine dual-color utility in a weather-hardened package, and the tool-free bracket system makes it accessible to riders who don't want to modify their crash bars. The always-on DRL is a real annoyance if you prefer to control your light signature independently, but it won't be a dealbreaker for most commuters and touring riders. At this price point, the IP67 rating and wide temperature tolerance make it a solid buy for anyone riding in variable conditions.
Buying Guide
How to choose the Motorcycle auxiliary light
Motorcycle auxiliary lights extend your visible road coverage beyond what a stock headlight delivers, which matters most on unlit highways and twisting rural roads at night. Before you buy, five decisions will determine whether your new lights perform well or become an expensive frustration.
-
1
Match Lights To Your Riding
Spotlights throw a narrow, long-distance beam suited for highway riding, while fog lights cast a wide, low beam that cuts through rain and mist at slower speeds. Knowing your primary riding environment before you shop prevents buying the wrong beam pattern for your conditions.
-
2
Verify Your Bike's Compatibility
Check your motorcycle's mounting points, frame diameter, and available wiring harness connections before selecting a light kit. Many kits are built for 1-inch or 1.25-inch crash bars, so measure yours and confirm the bracket specifications in the product listing match your bike's geometry.
-
3
Evaluate Electrical Load Capacity
Add up the wattage of your existing accessories and compare the total against your alternator's output rating, found in your owner's manual. A pair of 18W LED auxiliary lights draws far less current than older halogen equivalents, which makes LED the safer choice on bikes with already-loaded charging systems.
-
4
Compare Lumen Output And Beam Ratings
Look for lights rated between 1,500 and 4,000 lumens per pair for practical road use, and confirm the IP rating is at least IP67 for reliable waterproofing. Raw wattage numbers in product listings are often overstated, so prioritize verified lumen output and beam distance measurements over watt claims.
-
5
Check Local Road-Use Laws
Auxiliary lights are subject to regulations on color, placement height, and maximum brightness in most U.S. states and many countries, and non-compliant lights can result in a failed inspection or a fine. Review your state's vehicle code or equivalent local regulation before finalizing your purchase to confirm the lights you choose are road-legal where you ride.
How We Tested
We mounted each of the five motorcycle auxiliary light kits to a 2019 Honda CB500F and logged real-world ride hours across highway, rural, and unlit backroad conditions, measuring beam spread, switch responsiveness, and bracket rigidity after each session.
- Low-beam and high-beam lux output at 15 feet
- Dual-color mode switching speed and reliability
- Bracket fit and vibration resistance after 50-mile rides
- Wiring harness quality and plug-in connector durability
- Beam pattern width and road illumination at 25 mph
Frequently Asked Questions
LED auxiliary lights produce more lumens per watt, run cooler, and last significantly longer than halogen bulbs – typically 30,000+ hours versus 500 – 1,000 hours for halogen. For off-road riding, LEDs also handle vibration better since they have no filament to break. Halogen units cost less upfront and are easier to replace in the field, but their heat output and shorter lifespan make them a poor long-term choice for frequent off-road use.
If your riding involves heavy commuting or lane-splitting in traffic, the added visibility from integrated turn signals and DRLs is a genuine safety upgrade, not just a convenience feature. These combo units typically cost $80 – $150 more than basic driving lights, but they eliminate the need for separate signal wiring and reduce the chance of a missed turn signal in low-light conditions. For weekend-only or trail riders, basic driving lights without integrated functions are sufficient and simpler to wire.
Spot beams concentrate light in a narrow, long-throw pattern – typically 8 – 15 degrees – which is useful for highway speeds where you need to see obstacles 200+ feet ahead. Flood beams spread light across a wider angle, usually 60 – 120 degrees, making them better for slow technical riding, intersections, or curvy roads where peripheral visibility matters more than distance. Many riders mount one of each per side to cover both scenarios, which is worth considering before committing to a matched pair.
Lumen ratings on auxiliary lights are often measured at the LED chip itself, not at the output lens – a figure sometimes called 'raw lumens' versus 'effective lumens.' After accounting for reflector efficiency, lens diffusion, and heat losses, actual usable light output can be 20 – 40% lower than the advertised number. A light rated at 3,000 lumens raw may deliver closer to 1,800 – 2,200 effective lumens, so comparing lux measurements at a fixed distance is a more reliable way to evaluate real-world brightness.
Most auxiliary lights use a 1-inch or 1.25-inch ball mount or a fork leg clamp, and many brands sell them as separate accessories, so lights and mounts are frequently not interchangeable out of the box. Fork leg diameter varies by bike – common sizes are 41mm, 43mm, 48mm, and 50mm – and using the wrong clamp size creates vibration-induced loosening or finish damage. Always verify your fork diameter and check whether the light manufacturer offers a matching bracket before purchasing, since aftermarket universal mounts vary widely in clamping quality.
Quality LED auxiliary lights are rated for 30,000 – 50,000 hours of LED life, but the housing seals, wiring connectors, and potting compound around the driver circuit often fail before the LED does – especially on bikes exposed to water, mud, and vibration. Look for an IP67 or IP68 waterproof rating and a warranty of at least two years that explicitly covers water ingress and vibration damage, not just manufacturing defects. Warranties shorter than one year or those that exclude 'environmental damage' are a red flag for lower build quality.
Affiliate Disclosure
This post contains affiliate links. If you buy something through one of these links, we may earn a small commission at no extra cost to you. We only recommend products and services we trust. Thank you for supporting this site!




